Split Phase Power Factor Capacitor
Main Characteristics :
1.Pipeline shape capacitor(new patent product),the area of radiate heat is more than traditional capacitor.
2.In the equal condition,the temperature of Pipeline shape capacitor are less than traditional capacitor.
3.Use the polypropylene metallized film for material,with small size,light weight,and easy installation and maintenance(the un loadable seat).
4.Adopts fantastic golden and silver metal printing(patent).
5.With high reliability,the market quality satisfaction rate is 99.99%,with one years guarantee .
6.High safety,with discharge resistance and over-pressure protective device inside.
7.Low dielectric loss and perfect self-healing performance.
8.Adopts nontoxic,environment friendly impregnated material made of solid capacitor wax.
Specification |
Rated Voltage(V) |
Rated Reactive Power(KVAR) |
Total Capacitance(uF) |
Dimensions(mm) |
Drawing No |
Outgoing terminal |
|
0.23-20-3YN |
230 |
20 |
3×401.4 |
240×125×270 |
M8 |
||
0.23-15-3YN |
230 |
15 |
3×301 |
240×125×220 |
|||
0.23-10-3YN |
230 |
10 |
3×200.7 |
178×70×260 |
C |
M6 |
|
0.23-7.5-3YN |
230 |
7.5 |
3×150.5 |
178×70×220 |
|||
0.23-5-3YN |
230 |
5 |
3×100.3 |
178×70×165 |
|||
0.23-3-3YN |
230 |
3 |
3×60.2 |
178×70×165 |
|||
00.25-24-3YN |
250 |
24 |
3×407.6 |
240×125×270 |
M8 |
|
00.25-20-3YN |
230 |
20 |
3×339.7 |
240×125×270 |
||
00.25-15-3YN |
230 |
15 |
3×254.8 |
178×70×280 |
C |
M6 |
00.25-10-3YN |
230 |
10 |
3×170 |
178×70×260 |
||
00.25-7.5-3YN |
230 |
7.5 |
3×127.3 |
178×70×220 |
||
00.25-5-3YN |
230 |
5 |
3×84.9 |
178×70×165 |
||
00.25-3-3YN |
230 |
3 |
3×51 |
178×70×165 |
Main Technical Characteristics :
1.Apply standard:GB/T12747.1-2004 IEC60831-1:1996
2.Apply condition:Indoor,-25°C~40°C,humidity:<=80%RH,height<=2000MSL
3.Rated voltage:230VAC.250VAC.400VAC.415VAC.450VAC.525VAC.690VAC
4.Rated output:1~60Kvar
5.Capacitance tolerance:0~10%
6.Voltage endurance:2Un 10 seconds between T-T,3000VAC 10 seconds between T-C.
7.Loss angle tangent:Less than 0.1%(rated voltage at 20°C).
8.Ceiling voltage:1.1Un(root mean square value )
9.Ceiling current:1.3In(root mean square value )
10.Self-discharge feature:The terminal voltage will reduce below 50V in 3 minutes after disconnecting from power line.
Experiment Regulate:
1.Environment temperature:60°C constant temperature
2.Voltage:650V
3.Continuance Time:48hours
4.Difference in temperature less than 6°C
Install Notes:
1.Install it in the dry and well-ventilated place,prevent it from the corrosive gas or dust,from the direct sunlight and the rainy or snow.
2.The installation gap of two capacitors should be more than 50mm to benefit for heat radiation.
3.The connect wire should wear the capacitor over 1.3In and is reliable connection.
4.To regulation the power factor,connect anti-rush reactor or capacity contactor to avoid of rush current damaging the capacitor.
5.Using serial inductors when capacitors used in the environment that with high harmonic wave content.
6.To avoid of the superposing voltage damaging the capacitor,capacitor must be discharged over 3 minutes before re-input.
7.The capacitor should be used under rated voltage and current,or its life will be reduced if under an overrated condition.
Contour drawing and size:
